[ Home ] [ Up ] [ A286 Tech Data ] [ Inconel 600 Tech Data ] [ Inconel 601 Tech Data ] [ Inconel 617 Tech Data ] [ Inconel 625 Tech Data ] [ Inconel 718 Tech Data ] [ Inconel 750 Tech Data ] [ Inconel 800 Tech Data ] [ Inconel 825 Tech Data ]
You can send RFQs by filling out the RFQ form below. Or you can fax RFQs to 800-707-3439. We will get back to you ASAP.   * Inconel/Incoloy and Monel are Registered Trademarks of Special Metals Corporation and its subsidiaries.   Inconel 825 Technical Data Description: Inconel 825 is a nickel-iron-chromium-molybdenum alloy with good corrosion resistance to sulfuric and phosphoric acids and sea water. It is similar to Inconel 800 but with improved resistance to aqueous corrosion. Although not fully resistant to stress-corrosion cracking in boiling magnesium chloride, Inconel 825 has good resistance in neutral chloride media. Applications: Typical applications are: phosphoric acid evaporators; pickling-tank heater, pickling hooks and equipment; chemical process equipment; tank trucks; propeller shafts, and spent nuclear fuel element recovery.        Specifications: UNS N08825, Werkstoff Number 2.4858, Tradename INCOLOY Alloy 825      Alloy 825 Sheet, Strip and Plate BS 3072 NA16 BS 3073 NA 16 ASTM B 424 ASTM B 906 ASME SB 424 ASME SB 906 DIN 17750 VdTUV 432 Alloy 825  Rod, Bars, Forgings BS 3076 NA 16 ASTM B 425 ASTM B 564 ASME SB 425 ASME SB 564 ASME Code Case N-572 DIN 17752, DIN 17753, DIN 17754 VdTUV 432    Alloy 825 Pipe and Tube BS 3074 NA 16 ASTM B163, ASME SB 163 ASTM B 423, ASME SB 423 ASTM B 704, ASME SB 704 ASTM B 705, ASME SB 705 ASTM B 751, ASME SB 751 ASTM B 755, ASME SB 755 ASTM B 829, ASME SB 829 DIN 17751 VdTUV 432    Other Similar Specifications ASTM B366 ASME SB 366 DIN 17744       Typical Mechanical Properties: Alloy 825 Tensile Strength (MPa) 0.2% Offset Yield Strength (MPa) Elongation in  (%) Tubing Annealed 772 441 36 Tubing Cold Drawn 1000 889 15 Bar, Annealed 690 324 45 Plate, Annealed 662 338 45 Sheet, Annealed 758 421 39 Typical Room Temperature Tensile Properties Weldability: Alloy 825 can be readily welded by the shielded metal-arc process using alloy welding electrode 135, the gas shielded arc processes using alloy filler metal 65, and the resistance welding processes. The alloy requires no postweld heat treatment. The corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal.   Please call 800-707-6061 or fax to 800-707-3439. You can fill out the RFQ form below. We will get back to you ASAP. Thanks.   Please enter Material information such as spec., size, q'ty below. Information (Size, Spec., Q'ty) Name: Company: Email Address:  (Don't forget to enter. Please use company email address) Phone Number: Fax Number: Bidding Buying Research <= Choose the type of quote Comments:
* Visa, MasterCard, American Express & Discover For your convenience, we accept Visa, Master, Amex & Discover. We also accept PayPal. Please contact sales department if you have any questions regarding payment methods.