[ Home ] [ Up ] [ Inconel / Nickel ] [ Titanium ] [ A286 ] [ Aluminum ] [ Stainless, 13-8 15-5 17-4 17-7 ] [ Invar 36 Invar 42 Kovar ] [ 4130 ] [ Magnesium ] [ Value Added Services ] [ Specification ] [ Tech Data ] [ ISO/AS Certificate ] [ Export Service ] [ Request for Quote ] [ Credit Dep't ] [ Contact us ] [ Job Openings ] [ Boeing  Award ] [ Charity ] [ Sitemap ]
You can send RFQs by filling out the RFQ form below. Or you can fax RFQs to 800-707-3439. We will get back to you ASAP.   * Inconel/Incoloy and Monel are Registered Trademarks of Special Metals Corporation and its subsidiaries.   About Monel There are different commercial types of Monel such as Alloy 400 and Alloy K-500. Characteristics of Monel: Highly resistant to corrosion. Stronger than steel. Malleable. Low coefficient of thermal expansion. Highly resistant to alkalis. It can be welded, brazed and soldered. Applications: Monel is used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers. It is also used as part of metal instruments.        1) Monel 400 Monel 400 Sheet, Plate Per QQ-N-281 CL A: UNS N04400, AMS 4544, ASTM-B-127, BS 3072NA1, BS 3073NA13, DIN 17750, ASTM-B-162  Thickness: 0.018"~3.000", Width: 12"~60", Length: 36"~192" Monel 400 Round Bar/Wire: ASTM-B-164, QQ-N-281 , BS3076NA13, AMS 4675, AMS 4730, AMS 4731, DIN 17752, DIN 17753, VdTUV 263 Monel 400 Pipe & Tube: ASTM-B-165, ASTM-B-829, ASTM-B-775, ASTM-B-725, ASTM-B-163, ASTM-B-730, ASTM-B-751, AMS 4574, DIN 17752, VdTUV 2635 * Monel 400 Tubing is offered in a variety of requested sizes. Monel 400 Fittings: ASTM-B-366, Monel 400 Forgings: ASTM-B-564, DIN 17754, Monel 400 Weld Wire: AWS A5.14 ERNiCu-7. AWS A5.11 ENiCu-7 Specification: Monel 400 is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity. Monel 400 tubing possesses excellent corrosion resistance, which allows it to excel in marine applications including piping systems, pump shafts, seawater valves, etc. It is also found commonly in chemical plant equipment, crude oil distillation towers, boiler feeders and heat exchangers. Approximate Chemical Composition Ni 63% min Cu 28 - 34% Fe 2.5% max Mn 2% max   Properties DENSITY 8.8 g/cm3 0.318 lb/in3 MELTING POINT 1350oC 2460oF COEFFICIENT OF EXPANSION 13.9 µm/m °C (20 - 100°C) 7.7 x 10-6 in/in °F (70 - 212°F) MODULUS OF RIGIDITY 65.3 kN/mm2 9471 ksi MODULUS OF ELASTICITY 173 kN/mm2 25092 ksi   CONDITION OF SUPPLY HEAT TREATMENT (AFTER FORMING) Annealed/Spring Temper Stress relieve at 300 - 320oC (570 - 610oF) for 30 - 60 minutes and air cool. CONDITION APPROX TENSILE STRENGTH APPROX SERVICE TEMPERATURE Annealed 400 - 600 N/mm2 58 - 87 ksi -200 to +230oC -330 to +445oF Spring Temper 850 - 1050 N/mm2 123 - 152 ksi -200 to +230oC -330 to +445oF        2) Monel K-500 / K500 Monel K-500 / K500 Sheet, Plate Per QQ-N-286: UNS N05500 * Thickness: 0.040"~1.000", Width: 36"~48", Length: 60"~180" Monel K500 Round Bar/Wire: ASME SB-865, AMS 4676, QQ N 286, BS3073NA18, DIN 17750, ISO 6208, BS3075NA18, BS3076NA18, ASTM- B-865, DIN 17752, DIN 17753, DIN 17754, ASME Code Case 1192, ISO 9723, ISO 9724, ISO 9725, BS3074NA18, DIN 17751, DIN 17743 Monel K500 Forgings: QQ N 286, AMS 4676 Specification: Monel K-500 alloy is precipitation hardenable, due to the additions of Aluminium and Titanium. It combines the corrosion resistance of Monel 400 but gives the added advantage of extra strength and hardness (as a result of its age hardening ability). Chemical Composition Ni 63% min Cu 30% Fe 2% max Al 2.3 - 3.15% Ti 0.35 - 0.85%   Properties DENSITY 8.44 g/cm3 0.305 lb/in3 MELTING POINT 1350oC 2460oF COEFFICIENT OF EXPANSION 13.7 µm/m °C (20 - 100°C) 7.6 x 10-6 in/in °F (70 - 212°F) MODULUS OF RIGIDITY 66 kN/mm2 9573 ksi MODULUS OF ELASTICITY 179 kN/mm2 25962 ksi   CONDITION OF SUPPLY HEAT TREATMENT (AFTER FORMING) Annealed Age harden at 580 - 590oC (1075 - 1095oF) for 8 - 10 hours and air cool. * Spring Temper Age harden at 530 - 550oC (985 - 1020oF) for 4 - 6 hours and furnace cool to 450oC (840oF) at a rate of 8 -15oC (45 - 60oF) per hour and air cool.* Spring Temper Age harden at 530 - 540oC (985 -1005oF) for 4 - 6 hours and air cool. * * heat treating Monel K-500 in free air can have a detrimental effect on its corrosion resistant properties. CONDITION APPROX TENSILE STRENGTH APPROX SERVICE TEMPERATURE Annealed 650 - 850 N/mm2 94 - 123 ksi -100 to +260oC -150 to +500oF Annealed + Aged 950 - 1050 N/mm2 138 - 167 ksi -100 to +260oC -150 to +500oF Spring Temper 1000 - 1300 N/mm2 145 - 189 ksi -100 to +260oC -150 to +500oF Spring Temper + Aged 1200 - 1500 N/mm2 174 - 218 ksi -100 to +260oC -150 to +500oF 3) Waspaloy Waspaloy Sheet, Plate Per AMS 5544: UNS N07001, Chem AMS 5706 5707 5708 5709 5828 * Thickness: 0.012"~1.000", Width: 12"~48", Length: 36"~120" Waspaloy Round Bar/Wire: AMS 5706, AMS 5708, AMS 5709, ASTM-B-637 Waspaloy Solution Treated AMS-5708 Type 2, CAP. OF AMS-5709, PWA LCS, F14, F17 REV 3/5/10, PWA-300 BJ, GE: S400F 10/10/08, S1000F, ROLLS ROYCE: RR SABRE 9000, Fairchild MS 305 * Nitronic 60, also considered a Super Alloy, is designed to be the best non-galling stainless steel.   Please fill out the RFQ form below. We will get back to you ASAP. Thanks.   Please enter Material information such as spec., size, q'ty below. Information (Size, Spec., Q'ty) Name: Company: Email Address:  (Don't forget to enter. Please use company email address) Phone Number: Fax Number: Bidding Buying Research <= Choose the type of quote Comments:
* Visa, MasterCard, American Express & Discover For your convenience, we accept Visa, Master, Amex & Discover. We also accept PayPal. Please contact sales department if you have any questions regarding payment methods.